Rapid screening of DON contamination in whole wheat meals by Vis/NIR spectroscopy and computer vision coupling technology

This work intends to develop an online experimental system for screening of deoxynivalenol (DON) contamination in whole wheat meals by visible/near-infrared (Vis/NIR) spectroscopy and computer vision coupling technology. Spectral and image information of samples with various DON levels was collected at speed of 0.15 m s⁻¹ on a conveyor belt. The two-type data were then integrated and subjected to chemometric analysis. Discriminant analysis showed that samples could be classified by setting 1000 μg kg⁻¹ as the cut-off value. The best correct classified rate obtained in prediction was 93.55% based on fusion of spectral and image features, with reduced prediction uncertainty as compared to single feature. However, quantification of DON by quantitative analysis was not successful due to poor model performance. These results indicate that, although not accurate enough to provide conclusive result, this coupling technology could be adopted for rapid screening of DON contamination in cereals and feeds during processing.     

Distributed two‐stage state estimation with event‐triggered strategy for multirate sensor networks

This paper investigates the state estimation issue for a class of wireless sensor networks (WSNs) with the consideration of limited energy resources. First, a multirate estimation model is established, and then, a new event‐triggered two‐stage information fusion algorithm is developed based on the optimal fusion criterion weighted by matrices. Compared with the existing methods, the presented fusion algorithm can significantly reduce the communication cost in WSNs and save energy resources of sensors efficiently. Furthermore, by presetting a desired containment probability over the interval [0,1] with the developed event‐triggered mechanism, one can obtain a suitable compromise between the communication cost and the estimation accuracy. Finally, a numerical simulation for the WSN tracking system is given to demonstrate the effectiveness of the proposed method.     

Additive manufacturing of bipolar plates for hydrogen production in proton exchange membrane water electrolysis cells

Water electrolysis is a process that can produce hydrogen in a clean way when renewable energy sources are used. This allows managing large renewable surpluses and transferring this energy to other sectors, such as industry or transport. Among the electrolytic technologies to produce hydrogen, proton exchange membrane (PEM) electrolysis is a promising alternative. One of the main components of PEM electrolysis cells are the bipolar plates, which are machined with a series of flow distribution channels, largely responsible for their performance and durability. In this work, AISI 316L stainless steel bipolar plates have been built by additive manufacturing (AM), using laser powder bed fusion (PBF-L) technology. These bipolar plates were subjected to ex-situ corrosion tests and assembled in an electrolysis cell to evaluate the polarization curve. Furthermore, the obtained results were compared with bipolar plates manufactured by conventional machining processes (MEC). The obtained experimental results are very similar for both manufacturing methods. This demonstrates the viability of the PBF-L technology to produce metal bipolar plates for PEM electrolyzers and opens the possibilities to design new and more complex flow distribution channels and to test these designs in initial phases before scaling them to larger surfaces.     

《物理化学》课程思政建设的探索与实践

"立德树人"是高等教育的根本任务,思政教育能培养青年大学生树立正确的价值观。以近三年的《物理化学》课程教学实践为基础,举例说明《物理化学》课程的思政元素提炼,讨论了如何在授课教学环节有机融入课程思政内容。结果表明,思政元素的融入不仅能有效提高教学质量,更能激发学生的爱国热情,培养学生的辩证思维,有利于培养有理想、有素养的高素质人才。     

Immiscible PHB/PBS and PHB/PBSA blends: morphology,phase composition and modelling of elastic modulus

This paper reports the thermal, morphological and mechanical properties of environmentally friendly poly(3-hydroxybutyrate) (PHB)/poly(butylene succinate) (PBS) and PHB/poly[(butylene succinate)-co-(butylene adipate)] (PBSA) blends, prepared by melt mixing. The blends are known to be immiscible, as also confirmed by the thermodynamic analysis here presented. A detailed quantification of the crystalline and amorphous fractions was performed, in order to interpret the mechanical properties of the blends. As expected, the ductility increased with increasing PBS or PBSA amount, but in parallel the decrease in the elastic modulus appeared limited. Surprisingly, the elastic modulus was found properly described by the rule of mixtures in the whole composition range, thus attesting mechanical compatibility between the two blend components. This unusual behavior has been explained as due to co-continuous morphology, present in a wide composition range, but also at the same time as the result of shrinkage occurring during sequential crystallization of the two components, which can lead to physical adhesion between matrix and dispersed phase. For the first time, the elastic moduli of the crystalline and mobile amorphous fractions of PBS and PBSA and of the mobile amorphous fraction of PHB at ambient temperature have been estimated through a mechanical modelling approach. © 2021 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.     

基于拼接缝自适应消除和全景图矫直的快速图像拼接算法

针对图像拼接存在色差过渡不均匀、图像倾斜扭曲及拼接效率低的现象，提出一种基于拼接缝自适应消除和全景图矫直的快速图像拼接算法。首先，用尺度不变特征变换（SIFT）提取图像指定区域特征点并用双向K近邻（KNN）算法进行图像配准，有效提高算法效率；其次，利用动态规划思想提出自适应公式找到最优拼接缝并用图像融合算法对其自适应消除，解决拼接缝色差过渡不均匀问题；最后，针对累积拼接误差形成全景图倾斜的现象，利用边缘检测算法提出自适应拟合四边形矫直模型，把原始全景图矫直为一个全新的全景图。所提算法与分块图像拼接和二叉树图像拼接算法相比，图像质量提升了5.84%~7.83%，拼接时间仅为原来的50%~70%。实验结果表明，该算法不仅通过自适应更新机制减少不同图像背景下拼接缝色差过渡不均匀的现象，从而提高了图像质量；而且提高了拼接效率，降低了全景图倾斜扭曲程度。     

基于多特征融合的电影推荐系统

协同过滤算法（CF）根据用户-物品的评分矩阵做推荐，未考虑物品自身属性。本文将MovieLens数据集上的电影属性，作为影响推荐结果的因素，融合电影的简介、评论、评分、导演和演员等多种因素，进行推荐。使用CNN（卷积神经网络）和Word2Vec（Word to Vector,词向量模型）处理电影简介；使用AFINN（Finn rup Nielsen情感词典）处理评论，并对结果进行映射；对导演和演员数据进行建模，得到该因素下的预测评分，最后将各因素下的结果进行加权融合，通过调整权重，得到最佳效果。经验证，该方法的推荐性能优于传统的CF算法。     

基于张量分解融合RGB-D图像的物体识别

为了充分利用RGB-D图像的深度图像信息，提出了基于张量分解的物体识别方法。首先将RGB-D图像构造成一个四阶张量，然后将该四阶张量分解为一个核心张量和四个因子矩阵，再利用相应的因子矩阵将原张量进行投影，获得融合后的RGB-D数据，最后输入到卷积神经网络中进行识别。RGB-D数据集中三组相似物体的识别结果表明，利用张量分解融合RGB-D图像的物体识别准确率高于未采用张量分解的物体识别准确率，并且单一错分实例的准确率最高可提升99%。     

Self-consistent kinetic theory with nonlinear wave-particle resonances

We have developed, based on the oscillating-center transformation, a general theoretical approach for self-consistent plasma dynamics including, explicitly, effects of nonlinear(higherorder) wave-particle resonances. A specific example is then given for low-frequency responses of trapped particles in axisymmetric tokamaks. Possible applications to transport as well as nonlinear wave growth/damping are also briefly discussed.     

Diagnosis of the surface morphology of laser-ablated materials using the weighted- DCT approach in laser speckle interferometry for application to plasma facing materials

To implement on-line, real-time monitoring for the surface morphology of Plasma-Facing Materials (PFMs) in tokamak, we developed a Laser Speckle Interferometry measurement approach. A laser ablation method was used to simulate the erosion process during Plasma-Wall Interactions in a tokamak. In the present investigation, we evaluated the results of laser ablation morphology changes on the surface of Mo material reconstructed by four different approaches (Flood-fill, Quality-guided, Discrete Cosine Transform (DCT) and Weighted-DCT). The morphology results measured by the weighted-DCT approach are very close to the measurement results from confocal microscopy with an average error rate within 7%. It is verified that the weighted-DCT algorithm has high accuracy and can efficiently reduce the influence of noise pollution coming from laser ablation, which is used as a proxy for erosion from plasma wall interaction. Additionally, the CPU computer time has been shortened. This is of great significance for the real-time monitoring of PFMs’ morphology in the Experimental Advanced Superconducting Tokamak (EAST) in the future.